How to Distribute Objects

1Find Distribution Buttons

When the Banner Maker Pro program is opened, click the "Layout" tabbed item on the Main Ribbon Bar to switch to this category. Then find the "Distribute" sub-category on the panel. Next you will find these toolbar buttons. As shown below.

2Select the Objects

Please use the Selection Tool to select at least three or more objects at first.

3Do Distribution

• Distribute Left Edges: In all selected objects, the distance between the left edges of every two adjacent objects is equal.
• Distribute Centers Horizontally: In all the selected objects, the distance between the horizontal center points of every two adjacent objects is equal.
• Distribute Right Edges: In all selected objects, the distance between the right edges of every two adjacent objects is equal.
• Make Equal Gap Horizontally: In all the selected objects, the horizontal separation distance between every two adjacent objects is equal.

As shown in the figure below, use double arrows to mark equal horizontal intervals.

Distribute Left Edges	Distribute Centers Horizontally	Distribute Right Edges	Make Equal Gap Horizontally

• Distribute Top Edges: In all selected objects, the distance between the top edges of every two adjacent objects is equal.
• Distribute Centers Vertically: In all the selected objects, the distance between the vertical center points of every two adjacent objects is equal.
• Distribute Bottom Edges: In all selected objects, the distance between the bottom edges of every two adjacent objects is equal.
• Make Equal Gap Vertically: In all the selected objects, the vertical separation distance between every two adjacent objects is equal.

As shown in the figure below, use double arrows to mark equal vertical intervals.

Distribute Top Edges	Distribute Centers Vertically	Distribute Bottom Edges	Make Equal Gap Vertically

• Distribute Baseline Horizontally: Align all text objects horizontally to the baseline anchor point.
• Distribute Baseline Vertically: Align all text objects to the baseline anchor point in the vertical direction.

As shown in the figure below, use double arrows to mark equal intervals.

Distribute Baseline Horizontally	Distribute Baseline Vertically